| 物品名稱 | 規格型號 | 數量 | 單位 | 描述 |
|---|
| 鵝頸閥門 | 詳見規格 | 33.00 | 個 | {"規格型號":"34 ****** 1/IR-3D","公稱壓力":"4MPa","公稱通徑":"DN89mm","連接方式":"法蘭連接","驅動方式":"無","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"371°C","輸送介質":"蒸汽 水","材質":"鑄鋼","國產/進口":"國產","特殊要求":"1.尺寸要求:***:***,內徑89mm,上部法蘭外徑118mm,內徑50mm.2.原生產廠家:*********限公司 .3.配有壓力調節盤,可調節低壓介質的壓力和流量.4.適用于IR-3D型爐膛吹灰器.5.不合格品處理標準:***,由供應商無條件進行更換,退貨處理.","使用壽命":"365天","參照標準":"JB/T ****** 6","備注":"按要求完善選項參數"} |
| 圓風門 | 詳見規格 | 2.00 | 個 | {"規格型號":"DN1400","公稱壓力":"0.003MPa","公稱通徑":"1400mm","連接方式":"法蘭連接","密封方式":"石棉盤根密封","驅動方式":"手動","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"否","執行機構型號":"無","執行機構與閥門連接尺寸":"30*30*45mm","工作溫度":"≤400°C","輸送介質":"風粉混合物","主體材質":"16Mn","內襯材質":"無","國產/進口":"國產","特殊要求":"風門內徑1400±5mm,高度300±5mm,門框厚度≥16mm,擋板厚度≥16mm,法蘭厚度≥18mm,法蘭寬度≥80mm,兩側法蘭各有28個Ф25mm的孔均布,孔中心距165mm,孔中心距法蘭邊緣≥30mm,門框材質16Mn,擋板材質1Cr13,門軸材質304不銹鋼,風門間隙配合適當以保證運行中能夠靈活開關不出現卡澀現象,如到貨與技術要求不符,由供應商無條件進行退,換貨處理","使用壽命":"≥1460天","參照標準":"GB/T 1 ****** 8","備注":"風門內徑1400±5mm,高度300±5mm,門框厚度≥16mm,擋板厚度≥16mm,法蘭厚度≥18mm,法蘭寬度≥80mm,兩側法蘭各有28個Ф25mm的孔均布,孔中心距165mm,孔中心距法蘭邊緣≥30mm,門框材質16Mn,擋板材質1Cr13,門軸材質304不銹鋼,風門間隙配合適當以保證運行中能夠靈活開關不出現卡澀現象,如到貨與技術要求不符,由供應商無條件進行退,換貨處理"} |
| 自密封 | 詳見規格 | 6.00 | 個 | {"規格型號":"Ф299*266*40/45°","材質":"柔性石墨/內夾鎳網","公稱壓力":"19Mpa","適用溫度":"≤540°C","適用介質":"水、蒸汽","閥門配件序列號":"無","閥門規格":"SD61H-P54-19V/DN250","國產/進口":"國產","生產廠家":"任意生產廠家","特殊要求":"到貨后如不符合技術要求或表面破損、變形,供應商應無條件給予更換、退貨","使用壽命":"365天","參照標準":"JB/T ****** 6"} |
| 針型閥 | 詳見規格 | 20.00 | 個 | {"規格型號":"J13W-160P/M20*15","公稱壓力":"16MPa","公稱通徑":"15mm","連接方式":"螺紋連接","絲扣連接尺寸":"內螺紋,兩種不同連接G1/2-M20*1.5","工作溫度":"-29~538°C","輸送介質":"天然氣","主體材質":"304不銹鋼","國產/進口":"國產","特殊要求":"無","使用壽命":"1825天","參照標準":"GB/T 1 ****** 5"} |
| 蝸輪蝶閥 | 詳見規格 | 2.00 | 個 | {"規格型號":"D371X-16/DN80","公稱壓力":"1.6MPa","公稱通徑":"80mm","連接方式":"對夾式","驅動方式":"渦輪","工作溫度":"-15~150°C","主體材質":"鑄鐵","內襯材質":"氟橡膠","國產/進口":"國產"} |
