| 物品名稱 | 規格型號 | 數量 | 單位 | 描述 |
|---|
| 蝸輪蝶閥 | 詳見描述 | 3.00 | 個 | {"規格型號":"D371X-16/DN300","公稱壓力":"1.6MPa","公稱通徑":"300mm","連接方式":"對夾式","密封方式":"橡膠密封","驅動方式":"手動","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"否","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"0~200°C","輸送介質":"空氣","主體材質":"球墨鑄鐵","內襯材質":"三元乙丙橡膠","國產/進口":"國產","特殊要求":"閥桿45#鋼","使用壽命":"≥360天","參照標準":"GB/T 1 ****** 8","備注":"驗收標注:***,外觀無缺損,密封嚴密,閥體表面無銹蝕,開關靈活無卡澀,無明顯制造缺陷.不符合要求廠家要無條件給予退貨或換貨."} |
| 氣壓調節閥 | 詳見描述 | 30.00 | 個 | {"規格型號":"BFC-4000/二聯件","公稱壓力":"0~1MPa","公稱通徑":"15mm","連接方式":"1/2′′螺紋連接","出口壓力范圍":"0~1.5MPa","驅動方式":"自動","適用電壓":"無V","反饋信號":"無","是否配帶執行機構":"否","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"-10-60°C","輸送介質":"空氣","主體材質":"鋁合金","國產/進口":"國產","特殊要求":"過濾精度25-40μm","使用壽命":"≥180天","參照標準":"CB 568-2011","備注":"1.包裝完好,內部無破碎、損壞。/n2.型號、參數、等必須符合技術要求。/n4.備件到貨后必須附帶合格證及材質證明。/n5.若不符合技術要求或出現質量問題,則退換貨,產生的費用由供貨方承擔。"} |
| 截止閥 | 詳見描述 | 3.00 | 個 | {"規格型號":"J61Y-P54-100V/DN125","序列號":"無","公稱壓力":"10MPa","公稱通徑":"125mm","連接方式":"焊接","驅動方式":"手動","是否配帶執行機構":"否","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"0~540°C","輸送介質":"高溫蒸汽等","主體材質":"12Cr1MoV","國產/進口":"國產","生產廠家":"所有閥門生產廠家均可","特殊要求":"接管尺寸:Φ133*10mm","使用壽命":"1460天","參照標準":"GB/T 1 ****** 7","備注":"1、供應商提供產品合格證、材質報告單、供貨清單。2、驗收標準:***,供應商無條件給予免費退、換貨處理,產生的費用由供應商自行承擔。"} |
| 蝶形止回閥 | 詳見描述 | 2.00 | 個 | {"規格型號":"H76W-16/DN150","公稱壓力":"1.6MPa","公稱通徑":"150mm","連接方式":"對夾","驅動方式":"彈簧止回","適用電壓":"無","氣源壓力/液體壓力":"≤1.6MPa","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"0~500°C","輸送介質":"水","主體材質":"閥體,閥瓣,彈簧,及支架材質都為不銹鋼316L","國產/進口":"國產","特殊要求":"到貨包裝完好,外觀完好無損壞,帶有合格證。如所送到物品不符合技術要求或質量不合格,供貨商必須無條件給與退換貨。由此產生的費用由供貨商負責。","使用壽命":"720天","參照標準":"CB/T ****** 3"} |
| 金屬硬密封蝶閥 | 詳見描述 | 1.00 | 個 | {"規格型號":"D343H-16C/DN300","公稱壓力":"1.6MPa","公稱通徑":"300mm","連接方式":"法蘭連接","密封方式":"硬密封","驅動方式":"蝸輪驅動","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"≤425°C","輸送介質":"水、石膏漿液","主體材質":"鑄鋼","內襯材質":"合金鋼","國產/進口":"國產","特殊要求":"蝶閥結構形式:***","使用壽命":"730天","參照標準":"GB/T 3 ****** 9","備注":"供貨時需附帶合格證,材質檢驗報告.所供貨物無銹蝕,裂紋,表面光潔,密封接觸面無破損殘缺,結合嚴密無加工缺陷及工藝缺陷.如到貨不符合技術要求,由供應商無條件進行更換或退貨,所產生的費用由供貨商負責."} |
| 提升閥 | 詳見描述 | 8.00 | 個 | {"規格型號":"35 ****** 2/IK-525","公稱壓力":"4MPa","公稱通徑":"DN89mm","連接方式":"法蘭連接","驅動方式":"無","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"371°C","輸送介質":"蒸汽 水","材質":"鑄鋼","國產/進口":"國產","特殊要求":"1.尺寸要求:***:***,內徑89mm,閥體直徑110mm,2.原生產廠家:*********限公司 .3.配有壓力調節盤,可調節低壓介質的壓力和流量.4.適用于IK-525型伸縮式吹灰器.5.不合格品處理標準:***,由供應商無條件進行更換,退貨處理.","使用壽命":"365天","參照標準":"JB/T ****** 6","備注":"按要求添加選項參數"} |
| 堵閥自密封 | 詳見描述 | 2.00 | 個 | {"規格型號":"SD61H-P54/106V/DN225","材質":"柔性石墨內襯為1Cr18Ni9Ti鋼絲","公稱壓力":"0~20Mpa","適用溫度":"0~540°C","適用介質":"高壓給水、過熱蒸汽、凝結水等"} |
| 焊接式合金鋼截止閥 | 詳見描述 | 4.00 | 個 | {"規格型號":"J61Y-P54-170V/DN40","序列號":"無","公稱壓力":"17.0MPa","公稱通徑":"40mm","連接方式":"焊接","驅動方式":"手動","是否配帶執行機構":"否","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"0~540°C","輸送介質":"水、過熱蒸汽等","主體材質":"12Cr1MoV","國產/進口":"國產","生產廠家":"任意廠家","特殊要求":"接管尺寸:Φ48*6mm。閥桿是增強柔性石墨環密封。","使用壽命":"≥730天","參照標準":"DL/T 531-2016","備注":"零部件供貨時提供到貨清單+合格證+性能試驗報告單;合金等特殊材質件需提供材質檢測報告單;如有特殊使用要求或說明則應在合格證上標明或附帶說明書等資料.到貨與本技術要求不符,廠家無條件免費退換貨."} |
| 圓風門 | 詳見描述 | 2.00 | 個 | {"規格型號":"Ф325","公稱壓力":"0.05MPa","公稱通徑":"DN300mm","連接方式":"法蘭連接","密封方式":"無","驅動方式":"無","適用電壓":"380V","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"≤400°C","輸送介質":"空氣","主體材質":"Q235","內襯材質":"無","國產/進口":"國產","特殊要求":"1.殼體,翻板材質:***,軸材質:***#鋼,調質處理,不帶配對法蘭,風門內徑為325mm, 風門高度180mm,兩端法蘭各有12個Ф14mm的孔均布,法蘭螺栓螺中距Ф405mm. 殼體,翻板及法蘭厚度為10mm.2.風門介質溫度≤400°C,需經420°C等溫回火.3.擋釘可限制門板的開啟,關閉位置靠擋塊限制.4.調節擋板的開啟位置可有修正件3擋釘(Ф20,L=30)實現.5.件6擋塊在裝配時焊接,保證門板與法蘭面傾斜成10°.6.件3擋釘(Ф20,L=30)在裝配時焊接,保證門板開啟90°.","使用壽命":"1460天","參照標準":"GB/T 1 ****** 8","備注":"設計圖紙參照《煙風煤粉管道零部件典型設計手冊》D-LD ****** 05,尺寸以圖紙為準.驗貨要求:***,由供應商無條件進行退,換貨處理."} |
| 電動調節閥 | 詳見描述 | 1.00 | 個 | {"規格型號":"ZAZP-16/DN250","公稱壓力":"1.6MPa","公稱通徑":"DN250mm","連接方式":"法蘭連接","驅動方式":"電動手動一體","適用電壓":"電源:***、50Hz","氣源壓力/液體壓力":"無","反饋信號":"控制信號:***-20mA、反饋信號4-20mA","是否配帶執行機構":"是","執行機構型號":"配套SK-T型數控調節執行機構,開度為0-60","執行機構與閥門連接尺寸":"無","工作溫度":"-20—220°C","輸送介質":"消防水","主體材質":"1Cr18Ni9Ti","國產/進口":"國產","特殊要求":"閥桿2Cr13、填料柔性石墨","使用壽命":"730天","參照標準":"GB/T 1 ****** 8","備注":"1、原57編碼為:****26;/n2、產品的包裝應保證在運輸過程和貯存中不致?lián)p壞或遺失;/n3、包裝箱內應附有產品合格證、裝箱清單、性能試驗報告單及使用說明書;/n4、包裝、貯存和運輸過程中,閥瓣(閥板)應處于關閉位置固定不動;/n5、介質通流部位應清理干凈,不應有多肉、芯砂、鐵包砂、毛刺和氧化皮等缺陷;/n6、來貨如與技術要求不符或存在質量問題,供應商無條件給予免費退、換貨處理."} |
| 蝸輪法蘭蝶閥 | 詳見描述 | 1.00 | 個 | {"規格型號":"DN250","公稱壓力":"1.6MPa","公稱通徑":"250mm","連接方式":"法蘭連接","密封方式":"軟密封","驅動方式":"手動","適用電壓":"無","氣源壓力/液體壓力":"1.0MPa","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"≤80°C","輸送介質":"水","主體材質":"鑄鐵","內襯材質":"氟橡膠","國產/進口":"國產","特殊要求":"閥板材質2507雙相不銹鋼","使用壽命":"≥730天","參照標準":"GB/T 1 ****** 8","備注":"驗收標準:***,供應商無條件退換貨處理。"} |
| 雙法蘭蝶閥 | 詳見描述 | 1.00 | 個 | {"規格型號":"D341X-16/DN150","公稱壓力":"1.6MPa","公稱通徑":"150mm","連接方式":"法蘭連接","密封方式":"軟密封","驅動方式":"手動","適用電壓":"無","氣源壓力/液體壓力":"無","反饋信號":"無","是否配帶執行機構":"無","執行機構型號":"無","執行機構與閥門連接尺寸":"無","工作溫度":"0~80°C°C","輸送介質":"壓縮空氣","主體材質":"鑄鐵","內襯材質":"氟橡膠","國產/進口":"國產","特殊要求":"閥板材質:***","使用壽命":"≥1095天","參照標準":"GB/T 1 ****** 8","備注":"驗收標準:***,供應商無條件退換貨處理。"} |
| 倉泵氣化槽 | 詳見描述 | 4.00 | 個 | {"型號":"MB10-2.0/DN150","圖號":"無","材質":"20#鋼、聚氨酯橡膠","所屬設備名稱":"下引式倉泵","設備型號":"MB10-2.0","設備生產廠家":"原廠家為:*********限公司 ","國產/進口":"國產","使用壽命":"≥730天","特殊要求":"輸送介質:***,介質溫度:≤80°C,壓力:***.0MPa,使用壽命:***,氣化槽壁厚8±1mm,前后焊接DN150短管及法蘭盤,兩法蘭間距(安裝間距):***,兩側焊接氣化管連接絲頭(DN50),內部安裝聚氨酯橡膠材質氣化板,上法蘭平面與短管上平間距:***,不合格處理標準:***,廠家應給予退、換貨處理,若在要求使用壽命當中出現嚴重質量問題廠家應給予維修或更換。","參照標準":"JB/T ****** 0"} |
